Fantech EcoTech Range Fans

HVLS Selection Tool


Choose measurement units:

 
Building Width(f) is required!
 
Building Length(f) is required!
 
Building Height(f) is required!

Temperature must be between 25 deg C and 42 deg C

Temperature must be between 77 deg F and 108 deg F


Minimum cooling effect shown is at 90% Humidity, Maximum cooling effect shown is at 10% Humidity.


Models    
Coverage

Diameter (m)

Diameter (f)

No of fans

required

No of Fans

along width

No of fans

along length

Spacing between fans

width (m)

width (f)

Spacing between fans

length (m)

length (f)

Titan 14
Titan 16
Titan 18
Titan 20
Titan 24
 
Eco 8
Eco 10
Eco 12
Eco 14
Eco 16
Eco 18
Eco 20
Eco 24

*Select HVLS fans for cooling effect. For destratification, blow air towards floor at 10% of full speed for excellent destratification

*10% of full speed will achieve at least the recommended 1 AC/hr required for good destratification under all conditions

Energy Saving

including energy used to drive HVLS fans


If used in an air-conditioned building
Increase in air-conditioning setpoint

due to cooling effect of HVLS fans (°C)

Air-Conditioning Energy Savings

(Including energy used to drive HVLS fans)

*Energy savings and associated dollar savings will vary based on at least the following: geographic location, building structure and systems, fan performance, utility rates, and actual customer usage.
 
If used in a heated building

Building Height (m)

Building Height (f)

Temperature difference between floor and ceiling

without destratification (°C)

Approx. destratification energy savings

(including energy to drive HVLS fans)

 
*Suitable for simple square or rectangular buildings only.